How to Read a Cedarwood GC/MS Report

A GC/MS report looks intimidating: a column of chemical names, a column of percentages, and a laboratory logo. In practice it is a fingerprint, and reading one comes down to a few simple moves. If you buy cedarwood oil, and especially if you are choosing between a true cedar and a juniper sold under the same name, it is a skill worth having.

Cedarwood Essential Oil bottle

Cedarwood Essential Oil

Our own Cedarwood Essential Oil, in sizes from 0.5 oz to bulk.

From $9.99

Shop Now →

First, is the report about your bottle?

Before any chemistry, look at the identity block. A useful report names the laboratory, carries a batch or lot number that matches the one on your bottle, and states the botanical name, the plant part and the date. A report without those details describes some oil, somewhere, once. It is the same discipline we apply to our own paperwork: the Certificate of Analysis we publish covers one batch of our Atlas oil and lists a relative density of 0.934 and a refractive index of 1.513 at 20 C, both inside the standards printed on it. It does not include GC/MS data, and we have no document of that kind for our Himalayan, Virginian or Texas oils. If you need a composition report or species confirmation for any of them, ask us in writing through the contact page before you order and get the answer in writing.

Percentages are shares of a signal

The numbers on a report are usually percentages of peak area, meaning each compound's share of everything the detector saw in that run. EFSA's specification for Texas cedarwood oil, for example, expresses its figures as percent of GC area. So 28 percent does not mean 28 grams in 100 grams, and results from different laboratories, columns and methods can only be compared roughly.

Which compounds say which tree

The 2026 review by Setzer and Satyal gathered composition averages for the oils sold as cedarwood, and it makes the genus split easy to see. The true cedars are built on himachalenes. In 48 commercial Atlas oils, beta-himachalene averaged about 40 percent, with alpha- and gamma-himachalene behind it. Himalayan oils (43 samples) showed the same family of compounds, with beta-himachalene near 35 percent and noticeably more of the ketones called atlantones. The junipers tell a different story: cedrenes, thujopsene, cedrol and widdrol dominate. In 56 commercial Virginian oils, alpha-cedrene averaged about 32 percent, thujopsene about 19 and cedrol about 13.

So the first read is simple. Big himachalene peaks mean a Cedrus; big cedrene, thujopsene and cedrol peaks mean a juniper. That tells you the genus, which is the biggest question for most buyers, though it does not by itself tell you which of the junipers you hold. We describe each of our four oils by its aroma, such as dry and pencil-shaving sharp for Virginian, and not by its chemistry.

Expect numbers to disagree

Natural oils are not constants, and the literature shows it. The same review lists published reports of Atlas oil whose beta-himachalene ranges from under 2 percent to about 51 percent, depending on the sample and the source. The review also notes a rule of thumb that Himalayan oil is usually under 40 percent beta-himachalene while Atlas is typically over it, yet Atlas averages sit right around that line, so one marker alone is not a verdict. It adds that Atlas oil is frequently adulterated with Himalayan oil, because Atlas is scarcer and dearer, which is exactly why the full profile matters more than any single number.

That suggests a practical habit: ask what the figures are being compared against, whether a standard, a named paper or the seller's own specification. A report is most useful when it is read against something.

A friendly way to start

If a report is new to you, do not try to understand every line. Read it in the order a buyer would: the identity block first, then the biggest few peaks, then the notes at the bottom. Take a pencil and circle the top three compounds. Then compare what you see with the label on your bottle and what you smell when you open it. If you cannot make sense of it, send it to the seller and ask them to walk you through it. A good seller is glad to.

It also pays to keep your reports. File each one by lot number, so that when you reorder you can lay the new report beside the old and see at a glance whether anything looks different. A tidy folder takes minutes to set up and saves a lot of guessing later.

Finally, remember that the nose still counts. Open the bottle, smell it on a strip beside the report, and ask whether what you smell fits the story the numbers tell. A report and a nose that agree are a happy pairing.

Five questions worth asking any seller

  1. Does the report carry the lot number on my bottle, and a date?
  2. Which laboratory produced it, and by what method?
  3. Are the percentages peak area or weight, and against what reference?
  4. Which botanical name and plant part does it cover, and how was that confirmed?
  5. Does it say anything about non-volatile additions, such as a carrier oil, which GC/MS can miss?

Those questions apply to us as much as anyone. If you would like to go further, our article on cedrol and atlantones explains what those marker compounds are, our piece on home tests versus a lab covers screening, and our buying guide helps you decide among the four species.

A report can tell you a lot about what is in a bottle, and the scent in your hands will tell you whether you like it.

Cedarwood Essential Oil bottle

Cedarwood Essential Oil

Cedarwood Essential Oil from our own shop, in sizes from 0.5 oz to bulk.

From $9.99

Shop Now →

Sources & Further Reading